IEEE AP-S/URSI 2020 || Montréal, Québec, Canada || 5-10 July 2020

TH-A5.2P.1: GRADED INDEX DIELECTRIC SUPERSTRATE FOR PHASED ARRAY SCAN COMPENSATION

Roberto Rojas, Patrick Bluem, MIT Lincoln Laboratory, United States

TH-A5.2P.2: LOW COST ALL METAL ADDITIVELY MANUFACTURED WIDEBAND ANTENNA ARRAY MODULES

Jeffrey Massman, Air Force Research Laboratory, United States; Thomas Steffen, Defense Engineering Corporation, United States

TH-A5.2P.3: DESIGN OF DUAL-POLARIZED LOG-PERIODIC ANTENNA WITH EMBEDDED BALUN IMPEDANCE TRANSFORMER

Gaeron Friedrichs, Ljubodrag Boskovic, Dejan Filipovic, University of Colorado Boulder, United States

TH-A5.2P.4: DESIGN OF A 3D PRINTED GRADIENT INDEX LENS USING HIGH PERMITTIVITY CERAMIC

Yongduk Oh, Vivek T Bharambe, Jacob J Adams, North Carolina State University, United States; Dylan Negro, Additive Manufacturing Research Center, United States; Eric Macdonald, Youngstown State University, United States

TH-A5.2P.5: DESIGN AND IMPLEMENTATION OF A 9.4 DBI GAIN PATCH ANTENNA WITH ADDITIVELY MANUFACTURED DIELECTRIC LENS

Paul Probst, Deepak Kumar, Yiming Deng, Michigan State University, United States

TH-A5.2P.6: 3D METAL PRINTED POLARIZATION RECONFIGURABLE HORN ANTENNA WITH SOLID & MESHED STRUCTURES

Wei Zhang, Hengyi Zhou, Benjamin Falkner, Shubham Singh, Amit Mehta, Steven Milward, Swansea University, United Kingdom; Georgios MetaxasDaniel Butcher, Nicholas Lavery, Stephen G.R Brown, Swansea University, United Kingdom

TH-A5.2P.7: 3D PRINTABLE EMBEDDED RF CONNECTORS

Grant Heileman, UNM, ATA, AFRL, United States; Malcolm Reese, ATA, AFRL, United States; Derek Doyle, AFRL, United States; Christos Christodoulou, UNM, United States

TH-A5.2P.8: DESIGN AND FABRICATION OF 3D WIRE GRID ANTENNA

Mark Colgan, Mark Mirotznik, University of Delaware, United States

TH-A5.2P.9: DESIGN OF A 3D-PRINTED LENS FOR KA-BAND

Jose Manuel Poyanco, Francisco Pizarro, Pontificia Universidad Católica de Valparaíso, Chile

TH-A5.2P.10: A 3D PRINTED DISH ANTENNA WITH INTEGRATED FEEDING STRUCTURE

Xuanke He, Manos Tentzeris, Georgia Institute of Technology, United States

2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

5-10 July 2020 • Montréal, Québec, Canada

2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

5-10 July 2020 • MontrÃ©al, QuÃ©bec, Canada

Technical Program

TH-A5.2P: 3D Printed Antennas and Structures II